Acrylic Spas

All service related solutions for Acrylic Spas

Electrical Installation - Running the Electrical into the Cabinet
This instructional guide will aid in the planning/installation of the Electrical Power Supply for our Acrylic Spas.      All of our acrylic tubs have remo...
Thu, 13 Dec, 2018 at 2:34 PM
2024 Gecko K300 Messages And Checks
HL message warning! HL Error or OH Warning Spa temp AOH internal pack temp Flo message - No flow for more than 2 hours or no flow condition. Do not u...
Tue, 30 Apr, 2024 at 10:46 AM
2024 Balboa Acrylic Spa Messages And Checks
TP500 above Heater DRY message (HTR-DRY) Heater FLOW message (HTR - FLOW - LOSS or FAIL) Heater is too HOT message (OHH) These...
Tue, 30 Apr, 2024 at 10:48 AM
2023 Canadian Spa Company Gecko K300 Modes Without Eco (Mobile Phone Version)
Gander spa Time: 16:51pm Digital clock: Set your current time with its 24-hour setup. The modes will run from this setup time. Ho...
Fri, 2 Feb, 2024 at 9:06 AM
Electrical Installation - Correct Wiring for a 240V Supply
For more information about connecting the electrical to your tub, please click on our solution "Electrical Installation - Running the Electrical into...
Thu, 13 Dec, 2018 at 2:36 PM
Electrical Installation - Converting a 120V Balboa BP to 240V
This is an instructional guide detailing the steps required to convert the 120 volt Plug and Play Control Pack (Balboa BP501) to a 240 volt power supply.  ...
Thu, 2 Dec, 2021 at 9:57 AM
Acrylic Plug & Play - Balboa BP 120V Control Pack Configuration
Thu, 13 Dec, 2018 at 2:42 PM
Determining the Topside and Control Pack
Please see the chart below which will aid in identifying the type of Topside and Control Pack installed on your spa. Main difference between Topsides 6 and ...
Tue, 17 Aug, 2021 at 1:51 PM
Determining Cover Clips & Keys Required
There are two types of Cover Clips and Keys for our 5"/3" tapered Acrylic Hard Top Covers with heavy duty, reinforced locking straps. Please r...
Thu, 13 Dec, 2018 at 2:46 PM
Troubleshooting a Circulation Issue/No Flow
When water isn’t allowed to properly flow through the connections and/or filter, it reduces circulation throughout the entire spa. This can caus...
Thu, 13 Dec, 2018 at 2:47 PM