Acrylic Spas

All service related solutions for Acrylic Spas

Balboa BP Reminder Messages
Balboa TP600 Topside for BP501 Control Pack The Balboa BP System has a feature that provides reminder messages which appear on the ...
Thu, Dec 13, 2018 at 3:14 PM
Balboa BP Topside - Setting Heating Modes (Ready/Rest)
Ready Mode If you would like to ensure that the spa is always heating to the set temperature, you can set the spa to Ready mode.* In Ready mode, ...
Thu, Feb 14, 2019 at 12:13 PM
Balboa BP Topside - Setting Filtration Cycles
                                                     What is a filtration cycle? The filtration cycle is meant to circulate and maintain the cl...
Wed, Jan 23, 2019 at 1:15 PM
How does the Aromatherapy work?
The Aromatherapy Spa Scent will offer a light, soothing scent for approximately 30 days after opening the package.* Please follow these s...
Thu, Dec 13, 2018 at 3:21 PM
Spa Pump Will Not Start Up in the Winter - Frozen Pump
If you have just received and started up your new spa or just turned it on for the first time this winter but the pump won't start (it may also be givi...
Thu, Dec 13, 2018 at 3:22 PM
How To Free Up A Frozen or Seized Pump
Thu, Dec 13, 2018 at 3:23 PM
Acrylic Plug & Play - Spa Operation
Our Acrylic Plug & Play spas have one 2 Speed 2 HP pump that manages the jets as well as the heating of the spa. Since the Plug & Play feature...
Thu, Dec 13, 2018 at 3:24 PM
Replacing Jets (Hurricane Style)
"Hurricane" style jet The jet can be removed by turning the facing to the left (counter-clockwise) until it stops turning. Once you have rea...
Thu, Dec 13, 2018 at 3:44 PM
How To Install New Style Bread Pillows
The new style pillows have been modified so the backings are built in and unable to come apart. The original rectangular backings will need to be r...
Thu, Dec 13, 2018 at 3:45 PM
Troubleshooting an Ozonator Check Valve
If you have discovered water in the clear tubing that connects to the Ozone generator under your spa or are experiencing a leak from the Ozone generator. ...
Thu, Dec 13, 2018 at 3:49 PM