Acrylic Spas

All service related solutions for Acrylic Spas

How to replace a basic Cabinet Panel
Cabinet Panels play a key role in the insulation system of a Hot Tub and infuse it with a nice and fancy look. Over the time and due to the impact of s...
Thu, 7 Feb, 2019 at 3:47 PM
Canadian Spa Acrylic Hot Tubs - Main Features
Every Canadian Spa Hot Tub provides an unbeatable combination of seating capacity, quality, features, and design to satisfy any household. Below are some of...
Wed, 9 Oct, 2019 at 8:54 AM
How to replace a Perimeter LED Lens
Among the several features included with our Spas, the LED perimeter lighting is one of them. When the lights are activated on the main topside, the...
Fri, 17 Dec, 2021 at 12:09 PM
How to set Heating Modes on Balboa VL404 Topside
The Balboa VL404 Topside is usually installed on Spas with a Balboa VS Control System. This system allows the user to select the heating modes based on...
Fri, 15 Feb, 2019 at 3:51 PM
What is the difference between Plug & Play Spas and the 240V Spas?
Plug and Play Spas All Plug and Play Spas, or 120V spas, plug into a standard 15A household outlet. An electrician is not required for installation.  ...
Tue, 19 Mar, 2019 at 12:13 PM
How to Reset the Sensors in a Balboa BP501 Control System
This is an instructional guide on how to "reset" your sensors by unplugging them from the circuit board. Step 1: Turn off the power to the ...
Fri, 29 Mar, 2019 at 7:51 AM
How to Reset the Sensors in the Newport Control Pack - Generation 1 and 2
This is an instructional guide on how to reset the sensors in a Newport system. 2nd Gen Newport Pack System Reset:  Turn spa off Move left dipswitch (...
Fri, 8 Nov, 2019 at 7:46 AM
Spa Specifications
Wed, 20 Mar, 2019 at 8:19 AM
Which Pump Do I Have?
Wed, 20 Mar, 2019 at 8:23 AM
Swim Spas: Pump 3 not responding - Blown Fuse
If pressing Pump 3 on your Swim Spa activates the Jets 3 indicator light on your topside but the actual Pump 3 does not start, there might be a blown f...
Fri, 22 Mar, 2019 at 11:31 AM