Acrylic Spas
All service related solutions for Acrylic Spas
The Balboa VL404 Topside is usually installed on Spas with a Balboa VS Control System. This system allows the user to select their desired filtration c...
Thu, 31 Oct, 2019 at 8:48 AM
If your spa will not be used for an extended period in a location where there is a likelihood of below freezing temperatures, the spa should be "wi...
Fri, 1 Nov, 2019 at 1:21 PM
If your Spa is no longer reaching and keeping the set temperature even when is set to Ready or Standard Mode, there might be some issues with the heater or ...
Wed, 27 Nov, 2019 at 4:57 PM
The power cord on an Acrylic Plug and Play Spa can be replaced with the In-line 20ft GFCI. By doing this, you will get a longer power cord which would provi...
Tue, 10 Dec, 2019 at 10:00 AM
For Spas with 2 Pumps, there might be cases where Pump 1 operates properly on low and high speeds but when Pump 2 is pressed, the Jets indicator light turns...
Mon, 13 Sep, 2021 at 4:28 PM
Hot Tub Needs To Be ON To Perform Step 1 - Locate the dip-switch and flick the first switch in the upwards position Step 2 - Check display panel shoul...
Thu, 30 Jan, 2020 at 2:48 PM
If you feel your Spa does not provide you with enough water pressure when you run the low speed of your Pump, there are few changes you can make to increase...
Tue, 11 Feb, 2020 at 9:50 AM
If you have just received your new tub or have changed your water, please check the instructions on the video below to ensure you adjust and balance your wa...
Wed, 19 Aug, 2020 at 3:14 PM
When there is power going to the audio system, but the main topside remains off, the F6 fuse may be blown. This may happen on new installations when putting...
Wed, 26 Aug, 2020 at 3:45 PM
Balancing your Spa water can be challenging, specially when main chemical levels (Alkalinity, PH, Chlorine) appear to be within the recommended range or you...
Thu, 22 Oct, 2020 at 9:41 AM