If you feel your Spa does not provide you with enough water pressure when you run the low speed of your Pump, there are few changes you can make to increase the water pressure on an specific seat or side of your tub.
1. Close your Waterfall by turning the Waterfall Control Valve off. This will increase the flow of water that comes out of your jets.
2. Open your Air Valves. The air will put some extra force into the water flowing from the jets.
3. Manually close the faces of the jets you may not be using during your massage session. That will concentrate all water pressure only on the side of the tub and jets you would be using.
To watch a video showing how to go through these suggestions, please click HERE.