Portable Spas

Troubleshooting No Power to PCU GFCI
There are a few things you can do to try to restore power to the unit: 1. Disconnect the PCU from the tub (apply port caps inside tub) and plug the u...
Tue, Jun 11, 2019 at 9:00 AM
Internal Reset Instructions
Attach the Port Caps to the Intake/Outlet Ports on the inside of your tub. Disconnect the Portable Control Unit (PCU) from the tub. Disconnect the Co...
Tue, Aug 13, 2019 at 8:20 AM
V2 Portable Control Unit Disassembly Guide - Impeller Replacement
This is an Instructional Guide on a Impeller Replacement in a Portable Control Unit Attach the Port Caps to the Intake/Outlet Ports on the inside of you...
Tue, Aug 20, 2019 at 1:06 PM
GFCI Reset
This is an Instructional Guide on how to reset a Portable Control Unit using the GFCI A Ground Fault Circuit Interrupter (GFCI) or Residual Current Devi...
Fri, Jun 28, 2019 at 8:24 AM
V2 Portable Control Unit Disassembly Guide - Pump Replacement
This is an instructional guide for replacing the pump inside the Portable Control Unit (PCU).
Thu, Oct 31, 2019 at 9:08 AM
Setting Heating Modes on the Okanagan/Saskatoon Spas
The Okanagan and Saskatoon Spas can be set to 3 different Heating modes according to the user preferences, needs, season of the year, etc. Standard ...
Thu, Dec 12, 2019 at 2:52 PM
Setting Filtration Cycles for Okanagan/Saskatoon Spas
Filtration Cycles are meant to maintain your Spa water clean and healthy for the users. The Okanagan and Saskatoon Spas allow the user to set the Filtration...
Thu, Dec 12, 2019 at 5:25 PM