Our Covers come with heavy duty reinforced locking straps with keys to secure the cover against strong winds, unwanted access and to maximize heat retention. For directions to get the cover clips installed, follow the steps below or watch a video HERE.



  1. Locate the hardware provided that is usually tied to one of the straps.
  2. Place the Spa Cover ON making sure it is centered and the skirt is properly surrounding the tub.
  3. Separate both portions of the clip from the strap and proceed to secure each individual female clip into the cabinet panel using an screwdriver. The clip should be placed a bit higher than the length of the strap to be able to adjust the strap if needed to get a better seal. The more the strap is adjusted, the better heat retention.