Please click on either the image or to buy button below to place an order for the part you require.
Connection pipe o-ring
(Pipe and connection o-ring PCU & liner/bladder side)
Will be either red or black
KK-10823
To buy KK-10823
Filter lid assembly large o-ring
(Sits in behind thread of filter housing, just on the inside)
KK-10827
To buy KK-10827
Inlet & outlet cap
(Screw on the inside of spa, where the water goes in and out)
KK-10163
To buy KK-10163
PCU Pump impeller
(Draws water down through pump)
KK-10781
 
To buy KK-10781
Filter lid assembly whole
(Sits on top of filter)
KK-10829
To buy KK-10829
Filter lid bleed o-ring
(Small black o-ring on the thread)
KK-11014 
To buy KK-11014
Filter housing grid 
(Sits under the filter)
KK-10828 
To buy KK-10828
The short connector that screws onto PCU for jets and water out of the unit
(This is fitted to the PCU and secured)
KK-10919
To buy KK-10919
The long connector that screws onto PCU for water into the unit
(This is fitted to the PCU and secured)
KK-10920
To buy KK-10920
Long connector 30cm
(For Swift, Rio & Muskoka V2)
KK-10754
 
To buy KK-10754
Medium connector 25cm
(For jets only Swift, Rio & Muskoka V2)
(For all ports Grand Rapids only V2)
KK-10785
To buy KK-10785
Short connector 15cm
(For jets fitting to aromatherapy of Swift, Rio & Muskoka V2)
KK-10755
To buy KK-10755
Aromatherapy canister
(For jets Grand, Swift, Rio & Muskoka V2)
KK-10756
To buy KK-10756
V2 Pipe connector female thread
(Fits on ports of Swift, Muskoka & Rio Grande)
Comes with a black or red o ring
KK-10753
To buy KK-10753
V2 inflation hose
(For inflating bladder spas and lid)
KK-10850
To buy KK-10850
V2 drain cap
(For plastic drain pipe end)
KK-10096
To buy KK-10096
V2 top foam panel cap Rio & Swift V2
(For on top of each between each foam panel)
KK-10792
To buy KK-10792
V2 Swift Current liner 73inch diameter
(Top & Bottom liner, pool and bottom liner. Triangle for ports with jets at the bottom heat, and filtration at the top)
KK-10762
To buy KK-10762
V2 Grand Rapids main bladder
(Main inflatable bladder without outer skin. Triangle for ports with jets at the bottom, heat at the top, and filtration at the top)
KK-10848
To buy KK-10848
V2 Grand Rapids outer vinyl of lid
(Lid outer vinyl, not the bladder)
KK-10769
To buy KK-10769
V2 Swift Current lid bladder
(No outer vinyl, for on top style 73")
KK-10847
To buy KK-10847
V2 Grand Rapids lid bladder
(No outer vinyl, for on top style 70")
KK-10773
To buy KK-10773
V2 Large boston valve for inflatable bladders
(Rounded edge, for spas from 2017 onwards)
KK-10686
To buy KK-10686


Article published by Ali Green