See below the parts on sale. Click on either the pictures or click on the red buttons, this will take you to the link.


Connection pipe o-ring
(Pipe and connection o ring PCU & liner/bladder side V2)
Will be either red or black
KK-10823
To buy KK-10823
Filter lid assembly large o-ring
(Sits in behind the thread of filter housing, just on the inside)
KK-10827
To buy KK-10827
Inlet & outlet cap
(Screws on the inside of spa, where water goes in and out)
KK-10163
To buy KK-10163
PCU Pump impeller
(draws water down through into pump)
KK-10781
 
To buy KK-10781
Filter lid assembly whole
(Sits on top of the filter housing and is made up of 3 parts)
KK-10829
To buy KK-10829
Filter lid bleed o-ring
(Small black o-ring just above the thread)
KK-11014 
To buy KK-11014
Filter housing grid 
(Sits under the filter)
KK-10828 
To buy KK-10828
The short connector that screws onto the PCU for jets and water out of the unit
(Not the long pipe from the spa, this is fitted to the PCU and secured)
KK-10919
To buy KK-10919
The long connector that screws onto pcu for water in
(Not the long pipe from the spa, this is fitted to the PCU and secured)
KK-10920
To buy KK-10920
Long connector 30cm
(For Swift, Rio & Muskoka V2)
KK-10754

To buy KK-107

To buy KK-10754

 


Medium connector 25cm
(For jets only Swift Current, Rio Grande & Muskoka V2)
(For all ports Grand Rapids only V2)
KK-10785
To buy KK-10785
Short connector 15cm
(For jets and fitting to aromatherapy Swift Current, Rio Grande & Muskoka V2)
KK-10755
To buy KK-10755
Aromatherapy canister
(For jets Grand Rapids, Swift Current, Rio Grande & Muskoka V2)
KK-10756
To buy KK-10756
V2 Pipe connector female thread
(Fits on ports of Swift Current, Muskoka & Rio Grande)
Comes with a black or red o ring
KK-10753
To buy KK-10753
V2 inflation hose
(For inflating bladder spas)
KK-10850
To buy KK-10850
V2 drain cap
(For plastic drain pipe end)
KK-10096
To buy KK-10096
V2 top foam panel cap Rio & Swift V2
(For on top of each between each foam panel)
KK-10792
To buy KK-10792
V2 Swift Current liner 73inch diameter
(Top & Bottom liner, pool, and bottom liner. Triangle for ports with jets at the bottom heat, and filtration at the top)
KK-10762
To buy KK-10762
V2 Grand Rapids main bladder
(Main inflatable bladder without outer skin. Triangle for ports with jets at the bottom, heat at the top, and filtration at the top)
KK-10848
To buy KK-10848
V2 Grand Rapids outer vinyl of lid
(Lid outer vinyl, not the bladder)
KK-10769
To buy KK-10769
V2 Swift Current lid bladder
(No outer vinyl, for on top style 73")
KK-10847
To buy KK-10847
V2 Grand Rapids lid bladder
(No outer vinyl, for on top style 70")
KK-10773
To buy KK-10773
V2 Large boston valve for inflatable bladders
(Rounded edge, for spas from 2017 onwards)
KK-10686
To buy KK-10686