Please click on either the image or to buy button below to order the part you require.
Connection Pipe O-Ring
(Pipe and connection o-ring PCU & liner/bladder side)
Will be either red or black
KK-10823
To Buy KK-10823
Filter Lid Assembly Large O-Ring
(Sits in behind thread of filter housing, just on the inside)
KK-10827
To Buy KK-10827
Inlet & Outlet Cap
(Screw on the inside of spa, where the water goes in and out)
KK-10163
To Buy KK-10163
PCU Pump Impeller
(Draws water down through pump)
KK-10781
 
To Buy KK-10781
Filter Lid Assembly Whole
(Sits on top of filter)
KK-10829
To Buy KK-10829
Filter Lid Bleed O-Ring
(Small black o-ring on the thread)
KK-11014 
To Buy KK-11014
Filter Housing Grid 
(Sits under the filter)
KK-10828 
To Buy KK-10828
The Short Connector That Screws Onto PCU for Jets And Water Out Of The Unit
(This is fitted to the PCU and secured clockwise)
KK-10919
To Buy KK-10919
The Long Connector That Screws Onto PCU For Water Into The Unit
(This is fitted to the PCU and secured)
KK-10920
To Buy KK-10920
Long Connector 30cm
(For Swift, Rio & Muskoka V2)
KK-10754
 
To Buy KK-10754
Medium Connector 25cm
(For jets only Swift, Rio & Muskoka V2)
(For all ports Grand Rapids only V2)
KK-10785
To Buy KK-10785
Short Connector 15cm
(For jets fitting to aromatherapy of Swift, Rio & Muskoka V2)
KK-10755
To Buy KK-10755
Aromatherapy Canister
(For jets Grand, Swift, Rio & Muskoka V2)
KK-10756
To Buy KK-10756
V2 Pipe Connector Female Thread
(Fits on ports of Swift, Muskoka & Rio Grande)
Comes with a black or red o ring
KK-10753
To Buy KK-10753
V2 Inflation Hose
(For inflating bladder spas and lid)
KK-10850
To Buy KK-10850
V2 Drain Cap
(For plastic drain pipe end)
KK-10096
To Buy KK-10096
V2 Top Foam Panel Cap Rio & Swift V2
(For on top of each between each foam panel)
KK-10792
To Buy KK-10792
V2 Swift Current Liner 73inch Diameter
(Top & Bottom liner, pool and bottom liner. Triangle for ports with jets at the bottom heat, and filtration at the top)
KK-10762
To Buy KK-10762
V2 Grand Rapids Main Bladder
(Main inflatable bladder without outer skin. Triangle for ports with jets at the bottom, heat at the top, and filtration at the top)
KK-10848
To Buy KK-10848
V2 Grand Rapids Outer Vinyl Of Lid
(Lid outer vinyl, not the bladder)
KK-10769
To Buy KK-10769
V2 Swift Current Lid Bladder
(No outer vinyl, for on top style 73")
KK-10847
To Buy KK-10847
V2 Grand Rapids Lid Bladder
(No outer vinyl, for on top style 70")
KK-10773
To Buy KK-10773
V2 Large Boston Valve for Inflatable Bladders
(Rounded edge, for spas from 2017 onwards)
KK-10686
To buy KK-10686


Article published by Ali Green