This is an instructional guide on how to install the Port Caps on a Swift Current Portable Spa. Each Swift Current Portable Spa comes with a set of Port Caps, as pictured below:



If you are having difficulty installing your Port Caps, follow the steps below:


  1. First, make sure that your Port Caps all have the accompanying Gasket that sits inside the cap. The Gasket will ensure that there is a tight seal between the Port Cap and the Inlet/Outlet Port.
  2. Screw the Port Caps onto the Inlet/Outlet Ports until you have a tight seal. The Port Cap should twist onto the Inlet/Outlet Port smoothly. 
  3.  If you cross-thread the Port Caps (as shown below), you will will feel some resistance when twisting the Port Cap. Unscrew and then slowly re-screw the Port Cap onto the Inlet/Outlet Port to avoid any further cross-threading. 


If you require further assistance, please refer to our instructional video HERE.